European Sealing Association
Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm (/showthread.php?tid=101)



Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - AMTEC - 06-01-2020

Approval of Data Import from gasketdata.org

Type: sheet gasket
Publication: 02.07.2013

Material: GR

Link to gasketdata.org


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - IDT - 10-05-2020

EG at RT looks a little bit strange


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - SGL - 10-07-2020

For Frenzelit novaphit SSTC TA-L with XP 2.0 mm I voted for a leakage cross-check at 40 bar. If this cross-check confirms that the data provided by Frenzelit are within the allowable divergence compared to the cross-check, my vote for the 1.6 mm thick material changes to YES. If the cross-check of the 2.0 mm thick material should show that the allowable divergence is not met, I vote for a leakage cross-check at 40 bar for the 1.6 mm thickness as well.


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - Donit - 10-07-2020

Standard requires that Pqr values are measured at 3 different gasket surface stresses.
In this datasheet the Pqr was measured only at two different gasket surface stresses.
Additional data shall be added before publishing.


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - Klinger - 10-09-2020

Standard requires that Pqr values are measured at 3 different gasket surface stresses.


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - Teadit - 10-12-2020

Agree for 3 gasket loads at each temperature.


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - AVKO - 10-19-2020

(10-07-2020, 03:15 PM)Donit Wrote: Standard requires that Pqr values are measured at 3 different gasket surface stresses.
In this datasheet the Pqr was measured only at two different gasket surface stresses.
Additional data shall be added before publishing.

Agree.


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - AMTEC - 11-10-2020

Frenzelit provided the missing data for the creep relaxation tests. The results fit to the other characteristics sent earlier. Therefore, we suggest that the datasheet can be accepted now.

The datasheet is updated and available in the first post of this thread.


RE: Frenzelit novaphit SSTC TA-L with XP Tech 1,6 mm - Donit - 11-11-2020

Agreed.