![]() |
|
PLANICHEM SICHEM® S33 3.0 mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: PLANICHEM SICHEM® S33 3.0 mm (/showthread.php?tid=112) |
PLANICHEM SICHEM® S33 3.0 mm - AMTEC - 08-20-2020 Approval of Data Import from gasketdata.org Type: sheet gasket Publication: 3/20/2017 Material: PTFE Link to gasketdata.org RE: PLANICHEM SICHEM® S33 3.0 mm - IDT - 09-01-2020 Difference of PQR at 150°C too big... so far agree with AMTEC's proposal RE: PLANICHEM SICHEM® S33 3.0 mm - Teadit - 09-01-2020 Agree too with amtec RE: PLANICHEM SICHEM® S33 3.0 mm - SGL - 09-10-2020 I agree with AMTEC too. Rainer RE: PLANICHEM SICHEM® S33 3.0 mm - Flexitallic - 09-15-2020 Cross check PQR @ 150 C. Result of the cross-check (0,8) is between the values of the double test (0,74, 0,85). PLANICHEM agreed on the suggestion to consider 0,74 and 0,8 for the mean value which is publsihed on the datasheet. |