![]() |
|
Klinger KLINGERSIL C 4500 2.0 mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: Klinger KLINGERSIL C 4500 2.0 mm (/showthread.php?tid=161) |
Klinger KLINGERSIL C 4500 2.0 mm - AMTEC - 06-22-2021 Approval of Data Import from gaksetdata.org Publication Date: 03.07.2012 Link to gasketdata.org Type: Sheet gasket Material: Fiber RE: Klinger KLINGERSIL C 4500 2.0 mm - Donit - 10-04-2021 Agree with cross-check recommendation: EG @ 300 °C. Maja RE: Klinger KLINGERSIL C 4500 2.0 mm - SGL - 10-05-2021 Agree with cross-check recommendation EG @ 300 °C of AMTEC and DONIT. RE: Klinger KLINGERSIL C 4500 2.0 mm - Teadit - 10-05-2021 For me ok as recommended above. RE: Klinger KLINGERSIL C 4500 2.0 mm - AVKO - 10-06-2021 To me it seems that the numbers in the table responsible for Eg@300C are misplaced and shifted, i.e. I agree with AMTEC recommendation. Perhaps it'll be best to do a cross check. RE: Klinger KLINGERSIL C 4500 2.0 mm - Frenzelit - 10-14-2021 We agree with recommended crosscheck RE: Klinger KLINGERSIL C 4500 2.0 mm - AMTEC - 10-19-2021 Cross-check: EG @ 300°C Result of Cross-check: The moduli of elasticity are within the allowable divergence for cross-checks. Only at the first gasket stress level (20 MPa), the value is much higher than the values of the double test. We believe that this value is a result of the test procedure with heating up at a gasket stress level of 20 MPa. Also for othe fiber based sheet materials this effect can be recognized. We suggest to declare this value as an outliner. Therefore, we recommend that the characteristics as sown on the updated datasheet can be published. |