![]() |
|
SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm (/showthread.php?tid=191) |
SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - AMTEC - 10-14-2022 Approval of new datasheet Type: Sheet Gasket Material: Graphite Cross-check: All data look very consistent, therefore it is difficault to make a justified suggestion for a cross-check. Maybe modulus of elasticity at 150 °C? RE: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - Klinger - 10-17-2022 As datasheet of this grade underlines excellent tightness I'm in favour for a leakage test for a x-Check. e.g. 40bar RE: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - Garlock - 10-17-2022 This is the first graphite faced gasket, which does come back to original thickness after compression at RT. Values of 0,99 for me need to be re-checked. But maybe I am to much affiliated to PTFE. Cross check @RT needed This is the first graphite faced gasket, which does come back to original thickness after compression at RT. Values of 0,99 for me need to be re-checked. But maybe I am to much affiliated to PTFE. RE: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - Teadit - 10-18-2022 Agree with the leakage test. Greetings Florian RE: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - Donit - 10-20-2022 I also agree with the leakage test suggested by Klinger. RE: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - Frenzelit - 10-20-2022 We also agree with the suggestion for a leakage test as a cross check RE: SGL SIGRAFLEX iNXT V20010C5N 2.0 mm - AMTEC - 11-09-2022 Cross-check: Leakage test @ 40 bar All leak rates are within the allowable range. The data sheet is accepted. |