European Sealing Association
Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm (/showthread.php?tid=204)



Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - AMTEC - 12-12-2023

Approval of new Datasheet submitted by Jawa Industrie-Dichtungen GmbH (Non-member)



Type: Kammprofile Gasket

Material: GR


Since this is a new datasheet, and the tests were not performed by one of the acknowledged independent test houses, we recommend the following cross-checks:

- PQR@ 30MPa/200 °C
- Leakage test @40 bar

N.B: We realized that some data were not transfered to the evalution file. We added these missing data now.


RE: Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - Klinger - 12-12-2023

I agree with x-checks proposed by AMTEC


RE: Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - EynardRobin - 12-13-2023

I also agree with the cross-checking proposed by AMTEC.


RE: Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - SGL - 12-14-2023

I also agree with the cross-checks proposed by AMTEC


RE: Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - Montero - 12-18-2023

I agree with the cross-checks proposed by AMTEC


RE: Jawa Kammprofile Gasket M302A-M303A-M304A 5.0 mm - AMTEC - 02-05-2024

Cross-checks: 

The PQR value at 30 MPa/200 °C in the cross-check was 0,83 which is much better than 0,59 which was submitted by the manufacturer.

The leak rates measured in the cross-check are lower than the ones orivided by the manufacturer (except at first gasket stress level of 10 MPa).

Since the data shown on the datasheet are conservative, we recommend to publish these characteristics.