European Sealing Association
Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm (/showthread.php?tid=217)



Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - AMTEC - 10-14-2024

Approval of new Datasheet submitted by Jawa Industrie-Dichtungen GmbH (Non-member)

Type: Corrugated Gasket

Material: GR

Since this is a new datasheet, and the tests were not performed by one of the acknowledged independent test houses, we recommend the following cross-check:

- Leakage test @ 40 bar

Other suggestions are welcome.


RE: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - Donit - 10-16-2024

Agree with the amtec's suggestion.


RE: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - Montero - 10-16-2024

Agree with AMTEC


RE: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - Frenzelit - 10-17-2024

Cross check as suggested by amtec


RE: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - SGL - 10-21-2024

Agree with AMTEC


RE: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - Klinger - 10-21-2024

same like all bove


RE: Jawa Corrugated Gasket Typ SW201A 1.0 mm GR 3.5 mm - AMTEC - 11-11-2024

Cross-check: Leakage Test at 40 bar

In the cross-check the leakage rates at lower gasket stress levels were higher than in the test performed by the manufacturer. Also the results of the cross-check fit better to the leakage rates at 10 bar. The repetition of the cross-check confirmed the results of the first cross-check.

The manufacturer agreed to consider the results of both cross-checks to be published on the datasheet.