European Sealing Association
Spetech-SPETOTERM TUI 911 J C276-2.5 mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Spetech-SPETOTERM TUI 911 J C276-2.5 mm (/showthread.php?tid=218)



Spetech-SPETOTERM TUI 911 J C276-2.5 mm - AMTEC - 10-14-2024

Approval of new Datasheet submitted by Spetech

Type: Sheet Gasket

Material: Silicate

Since this is a new datasheet, and the tests were not performed by one of the acknowledged independent test houses, we recommend the following cross-check:

- PQR @ 120 MPa/700 °C


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - Montero - 10-16-2024

Agree with AMTEC


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - Teadit - 10-20-2024

Agree


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - IDT - 10-21-2024

Agree


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - Frenzelit - 10-21-2024

Agree with Amtec


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - SGL - 10-21-2024

Agree


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - AVKO - 10-21-2024

Agree with AMTEC


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - Klinger - 10-21-2024

and agree as well


RE: Spetech-SPETOTERM TUI 911 J C276-2.5 mm - AMTEC - 11-08-2024

Cross-check:

PQR @ 120 MPa / 700 °C. The result of the cross-check is in line with the data provided by the manufacturer.