![]() |
|
Flexitallic DN40 SWG CGI PTFE 316L 4.6mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: Flexitallic DN40 SWG CGI PTFE 316L 4.6mm (/showthread.php?tid=25) |
Flexitallic DN40 SWG CGI PTFE 316L 4.6mm - root - 01-06-2020 Approval of Data Import from gasketdata.org Type: spiralwound gasket Publication: 01/09/17 Material: PTFE Link to gasketdata.org RE: Flexitallic DN40 SWG CGI PTFE 316L 4.6mm - Donit - 07-23-2020 I would expect that the Pqr value at 30 MPa and 150°C will be higher. Maybe we shall ask the manufacturer to repeat the Pqr tests at 30MPa at 150°C and 250°C. RE: Flexitallic DN40 SWG CGI PTFE 316L 4.6mm - IDT - 07-27-2020 Strange course of the PQR value at 50 MPa... I would recommend a cross-check at 150°Cand also the higher temperature RE: Flexitallic DN40 SWG CGI PTFE 316L 4.6mm - AMTEC - 10-06-2020 Cross-check PQR @ 50 MPa/150 °C The PQR value of the cross-check (0.78) is within the allowable range compared to the mean value (0.80) of the double test. Therefore, the datasheet is accepted. |