European Sealing Association
Teadit International 24SH 3.0mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: Teadit International 24SH 3.0mm (/showthread.php?tid=28)



Teadit International 24SH 3.0mm - root - 01-06-2020

Approval of Data Import from gasketdata.org

Type: sheet gasket
Publication: 09/12/16

Material: PTFE

Link to gasketdata.org


RE: Teadit International 24SH 3.0mm - Donit - 06-08-2020

There are no remarks in the datasheet if a bore intrusion occurs.
To check this I suggest Pqr test at 100 MPa and 230°C.
I think that remarks about bore intrusion shall be added whenever they occur.

Maja


RE: Teadit International 24SH 3.0mm - AMTEC - 07-20-2020

Since the information about bore intrusion was provided, no cross-check is necessary. Datasheet is accepted.