![]() |
|
GORE® Universal Pipe Gasket 3.0mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: GORE® Universal Pipe Gasket 3.0mm (/showthread.php?tid=44) |
GORE® Universal Pipe Gasket 3.0mm - root - 01-06-2020 Approval of Data Import from gasketdata.org Type: sheet gasket Publication: 02/02/16 Material: PTFE Link to gasketdata.org RE: GORE® Universal Pipe Gasket 3.0mm - Klinger - 06-22-2020 All submitted GORE UPG show increase in leakage beginning at 60MPa rather than getting tighter. This might indicate destruction of gasket.I propose x check of qsmax RT with visual inspection of gasket. RE: GORE® Universal Pipe Gasket 3.0mm - AMTEC - 09-30-2020 It is recommended to accept the datasheet without a cross-check. Comment to the other replies of the Task force: Klinger: The increase of the leak rate at gasket stress levels above 60 MPa is probably caused by too short measuring times. The characteristics are not influenced by this behavior. RE: GORE® Universal Pipe Gasket 3.0mm - IDT - 10-01-2020 Accepted from IDT |