European Sealing Association
SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm (/showthread.php?tid=51)



SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm - root - 01-06-2020

Approval of Data Import from gasketdata.org

Type: sheet gasket
Publication: 02.04.2015

Material:GR

Link to gasketdata.org

Rev. a: New test result for EG @ 300 °C were submitted by SGL.


RE: SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm - Donit - 07-22-2020

Eg at 300°C.


RE: SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm - Flexitallic - 07-30-2020

Cross check Eg at 300C


RE: SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm - AMTEC - 10-05-2020

Cross-check:

EG @ 300 °C

In the cross-check the allowable divergence was exceeded in several gasket stress levels.

SGL has submitted new test results, see Rev. a in the first post of this thread.


RE: SGL SIGRAFLEX HOCHDRUCK PRO V10011Z3IP 1.0mm - Donit - 10-06-2020

Agreed.