![]() |
|
Imperator Industries EYRKAM S2AM 4.8mm - Printable Version +- European Sealing Association (https://forum.bacibg.org) +-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1) +--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2) +---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10) +---- Thread: Imperator Industries EYRKAM S2AM 4.8mm (/showthread.php?tid=98) |
Imperator Industries EYRKAM S2AM 4.8mm - root - 01-06-2020 Approval of a new Data Sheet Type: kamprofile gasket Material: GR Testing Laboratory: CETIM RE: Imperator Industries EYRKAM S2AM 4.8mm - IDT - 09-01-2020 Agree with the proposal of AMTEC to do a cross-check of PQR RE: Imperator Industries EYRKAM S2AM 4.8mm - Teadit - 09-01-2020 I guess the one PQR value contains a typing error. Should be checked at first. RE: Imperator Industries EYRKAM S2AM 4.8mm - Donit - 09-01-2020 To me the difference in gasket thickness of tested samples is too high. Sample thickness 4.0 mm or 4.7 mm for the same gasket type. I would like to know if this is acceptable. RE: Imperator Industries EYRKAM S2AM 4.8mm - Frenzelit - 09-02-2020 I agree with proposal of amtec for cross check of PQR The difference in gasket thickness is really high, perhaps also checking if there is a typing error? RE: Imperator Industries EYRKAM S2AM 4.8mm - Flexitallic - 09-03-2020 Cross-check of PQR RE: Imperator Industries EYRKAM S2AM 4.8mm - AMTEC - 10-06-2020 Cross-check: PQR @ 50 MPa/400 °C The result of the cross-check (0.94) fits to the mean value of the double test (0.93). Therefore, the datasheet is accepted. |