Approval of Data Import from gaksetdata.org
Publication Date: 26.03.2014
Link to gasketdata.org
Type: Sheet gasket
Material: Fiber
Publication Date: 26.03.2014
Link to gasketdata.org
Type: Sheet gasket
Material: Fiber
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 1 | 20.00% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 2 | 40.00% | |
| Abstain | 2 | 40.00% | |
| Total | 5 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
KLINGERSIL C 4409 2.0 mm
|
|
Approval of Data Import from gaksetdata.org
Publication Date: 26.03.2014 Link to gasketdata.org Type: Sheet gasket Material: Fiber
10-22-2021, 12:53 PM
I am ok with amtec recommendation of cross check.
11-02-2021, 02:32 PM
Agree with amtec recommendation of cross check.
Cross-check:
We recommended a cross-check to verify the higher creep/relaxation factor compared to the one published on gasketdata.org.. PQR @ 30 MPa/250 °C Result of cross-check: The determined PQR value @30 MPa/250 °C was 0.74. The divergence to the value published by Klinger (0.81) is 0.07 which is above the allowable divergence of 0.05. The PQR test was repeated, the same PQR value of 0.74 was determined in this second test. Klinger agreed that PQR of 0.74 @ 30 MPa/250 °C will be published on the datasheet. |
|
« Next Oldest | Next Newest »
|