08-04-2020, 03:05 PM
(07-27-2020, 11:47 AM)IDT Wrote:OK for KLINGER(07-24-2020, 09:55 AM)AMTEC Wrote: The following cross-check is defined:
PQR @ QSmax (180 MPa)/400°C.
Result:
The sample failed in the PQR test @ 180 MPa/400 °C.
SGL was informed about this result and performed PQR double tests at 160 MPa/400 °C. The gasket passed these tests and the PQR values were determined at 0.99. The datasheet is updated with lower QSmax value at 400 °C and with PQR values at 160 MPa/400 °C.
No objections from IDT

