Poll: Do you agree on publishing the datasheet?
You do not have permission to vote in this poll.
Yes
0%
0 0%
No (Comment in the thread)
0%
0 0%
Yes, but cross-check is required (Specify kind of test in the thread)
100.00%
8 100.00%
Abstain
0%
0 0%
Total 8 vote(s) 100%
* You voted for this item. [Show Results]

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Spetech-DryFlex C276 FG APX2-4.0 mm
#1
Thumbs Up 
Approval of new Datasheet submitted by Spetech

Type: Kammprofile Gasket

Material: GR

Since this is a new datasheet, and the tests were not performed by one of the acknowledged independent test houses, we recommend the following cross-check:

- PQR @ 50 MPa/700 °C

Other suggestions are welcome.


Attached Files
.pdf   Spetech-DryFlex C276 FG APX2-4.0 mm_ESA Approval_2024-10-14.pdf (Size: 1.3 MB / Downloads: 6)
Reply
#2
The Pqr value at 50 MPa is decreasing with temperature, but increases at 700°C. Pretty illogical, so amtec's suggestion is OK.
Leakage cureves are strange to me. I'm more used to such leakage curves IDT has on ESAdata web page.
Regards, Maja
Reply
#3
Agree with AMTEC and Donit
Reply
#4
Agree
Reply
#5
Agree with all aspects before...
Reply
#6
Agree with comments mentioned before
Reply
#7
agree
Reply
#8
Agree to above
Reply
#9
Agree with Maja, it seems illogical.

And it is the same with the other material posted here for voting:
Spetech-SPETOTERM TUI 911 J C276-2.5 mm
Reply
#10
Result of Cross-check

PQR @ 50 MPa / 700 °C: 0.84
The characteristics provided by the manufacturer are 0.88 and 0.86, so the cross-check result is within the allowable deviation.

We recommend to published the datasheet in the current version.


Attached Files
.pdf   Spetech-DryFlex C276 FG APX2-4.0 mm_Cross-check_2024-11-12.pdf (Size: 107.71 KB / Downloads: 1)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)