Approval of a new Data Sheet
Type: sheet gasket
Material: PTFE
Testing Laboratory: In-house
Type: sheet gasket
Material: PTFE
Testing Laboratory: In-house
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 2 | 28.57% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 4 | 57.14% | |
| Abstain | 1 | 14.29% | |
| Total | 7 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
IDT UNIFLUOR FD01 WS 7551 2.0mm
|
|
Approval of a new Data Sheet
Type: sheet gasket Material: PTFE Testing Laboratory: In-house
08-21-2020, 01:31 PM
A cross check is necessary as this is a new data sheet. I agree with the proposal of AMTEC. Regards, Rainer
09-01-2020, 01:47 PM
09-01-2020, 04:36 PM
tightness results for 16bar are almost identical with results for 40bar (loading)
examples: 16bar: 30MPa = 1,11E-02 40bar: 30MPa = 1,52E-02 16bar: 40MPa = 8,34E-04 40bar: 40MPa = 7,33E-04 as internal pressure is more than double the gap in tightness is supposed to be bigger. I may ask for x-check 40bar
09-02-2020, 01:51 PM
A cross check is necessary as this is a new data sheet.
We agree with the proposal of amtec
09-03-2020, 06:36 PM
Suggest cross check as this is a new data sheet.
We agree with the proposal of amtec.
Cross-check EG @ RT was recommended. TF asked for an additional cross-check @ 40 bar.
In the leakage test at 40 bar, the results of IDT´s double test could be confirmed. In the EG test, the divergence at low gasket stresses was higher than the acceptable one. In the repetition of the cross-check, the results of the first cross-check was confirmed. IDT agreed to the replacement of their EG/RT results against the results of the two cross-checks. As there was one outliner at 80 MPa in one of the two tests, this value was ignored in the evaluation. The results of the cross-checks are attached. The revised datasheet is uploaded in the first post of this thread, it can be accepted in the present form |
|
« Next Oldest | Next Newest »
|