European Sealing Association
SGL SIGRAFLEX HOCHDRUCK PRO V15011Z3IP 1.5mm - Printable Version

+- European Sealing Association (https://forum.bacibg.org)
+-- Forum: Flange Gaskets (https://forum.bacibg.org/forumdisplay.php?fid=1)
+--- Forum: Gasket Database (https://forum.bacibg.org/forumdisplay.php?fid=2)
+---- Forum: ESAData Approved Datasheets (https://forum.bacibg.org/forumdisplay.php?fid=10)
+---- Thread: SGL SIGRAFLEX HOCHDRUCK PRO V15011Z3IP 1.5mm (/showthread.php?tid=52)



SGL SIGRAFLEX HOCHDRUCK PRO V15011Z3IP 1.5mm - root - 01-06-2020

Approval of Data Import from gasketdata.org

Type: sheet gasket
Publication: 09.04.2019

Material:GR

Link to gasketdata.org


RE: SGL SIGRAFLEX HOCHDRUCK PRO V15011Z3IP 1.5mm - Teadit - 07-22-2020

Maybe we should decide to use the average of 3 E-Modul test at such behaviour (results with runaway values)? Some materials seems to have such trend and more tests would give better results to perform calculations. Third test could be performed by inhouse testing.


RE: SGL SIGRAFLEX HOCHDRUCK PRO V15011Z3IP 1.5mm - Donit - 07-22-2020

(07-22-2020, 07:21 AM)Teadit Wrote: Maybe we should decide to use the average of 3 E-Modul test at such behaviour (results with runaway values)? Some materials seems to have such trend and more tests would give better results to perform calculations. Third test could be performed by inhouse testing.
Agree with proposal of Teadit.

If Pqr test at 300°C was performed later on other test samples, the result can be slightly different from the first tested samples.
Here I would expect the value of 0,92.