Approval of Data Import from gasketdata.org
Type: sheet gasket
Publication: 02/02/16
Material: PTFE
Link to gasketdata.org
Type: sheet gasket
Publication: 02/02/16
Material: PTFE
Link to gasketdata.org
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 3 | 60.00% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 1 | 20.00% | |
| Abstain | 1 | 20.00% | |
| Total | 5 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
GORE® Universal Pipe Gasket 3.0mm
|
|
Approval of Data Import from gasketdata.org
Type: sheet gasket Publication: 02/02/16 Material: PTFE Link to gasketdata.org
06-22-2020, 11:09 PM
All submitted GORE UPG show increase in leakage beginning at 60MPa rather than getting tighter. This might indicate destruction of gasket.I propose x check of qsmax RT with visual inspection of gasket.
It is recommended to accept the datasheet without a cross-check.
Comment to the other replies of the Task force: Klinger: The increase of the leak rate at gasket stress levels above 60 MPa is probably caused by too short measuring times. The characteristics are not influenced by this behavior.
10-01-2020, 08:10 AM
Accepted from IDT
|
|
« Next Oldest | Next Newest »
|