Approval of a new Data Sheet
Type: kamprofile gasket
Material: GR
Testing Laboratory: CETIM
Type: kamprofile gasket
Material: GR
Testing Laboratory: CETIM
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 0 | 0% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 3 | 50.00% | |
| Abstain | 3 | 50.00% | |
| Total | 6 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
Imperator Industries EYRKAM S2AM 4.8mm
|
|
Approval of a new Data Sheet
Type: kamprofile gasket Material: GR Testing Laboratory: CETIM
09-01-2020, 09:56 AM
Agree with the proposal of AMTEC to do a cross-check of PQR
09-01-2020, 11:30 AM
I guess the one PQR value contains a typing error. Should be checked at first.
09-01-2020, 02:54 PM
To me the difference in gasket thickness of tested samples is too high.
Sample thickness 4.0 mm or 4.7 mm for the same gasket type. I would like to know if this is acceptable.
09-02-2020, 01:25 PM
I agree with proposal of amtec for cross check of PQR
The difference in gasket thickness is really high, perhaps also checking if there is a typing error?
09-03-2020, 06:47 PM
Cross-check of PQR
10-06-2020, 10:43 AM
Cross-check:
PQR @ 50 MPa/400 °C The result of the cross-check (0.94) fits to the mean value of the double test (0.93). Therefore, the datasheet is accepted. |
|
« Next Oldest | Next Newest »
|