07-28-2020, 11:10 AM
E-Modulus looks weird but have too little experience for this gasket type to decide and will abstain.
| Poll: Do you agree on publishing the data? You do not have permission to vote in this poll. |
|||
| Yes | 3 | 37.50% | |
| No (Comment in the thread) | 0 | 0% | |
| Yes, but cross-check is required (Specify kind of test in the thread) | 4 | 50.00% | |
| Abstain | 1 | 12.50% | |
| Total | 8 vote(s) | 100% | |
| * You voted for this item. | [Show Results] |
|
IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by root - 01-06-2020, 12:12 AM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by Teadit - 07-28-2020, 11:10 AM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by Donit - 08-11-2020, 12:04 PM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by Frenzelit - 08-05-2020, 12:28 PM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by Klinger - 08-05-2020, 05:40 PM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by AVKO - 08-12-2020, 12:56 AM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by AMTEC - 10-06-2020, 09:56 AM
RE: IDT Corrugated metallic gasket with graphite layer, WD10, WS1.4571/3803 3 mm - by Donit - 10-06-2020, 12:08 PM
|