Cross-checks:
The PQR value at 30 MPa/200 °C in the cross-check was 0,83 which is much better than 0,59 which was submitted by the manufacturer.
The leak rates measured in the cross-check are lower than the ones orivided by the manufacturer (except at first gasket stress level of 10 MPa).
Since the data shown on the datasheet are conservative, we recommend to publish these characteristics.
The PQR value at 30 MPa/200 °C in the cross-check was 0,83 which is much better than 0,59 which was submitted by the manufacturer.
The leak rates measured in the cross-check are lower than the ones orivided by the manufacturer (except at first gasket stress level of 10 MPa).
Since the data shown on the datasheet are conservative, we recommend to publish these characteristics.

